BM-700 Professional Studio Broadcasting&Recording Condenser Microphone Set (Black)
PRODUCT HIGHLIGHTS
- Frequency Response: 20Hz-20kHz
- Included Cable: 3m/9.8FT 3.5mm Male to 3Pin XLR Female
- Shock Mount and Sponge cover included
This is a professional condenser microphone ,which adopts the exacting complete electronic circuit control and gold-plate diaphragm capsule, the microphone with a good cardioids polar pickup pattern, high output, low self-noise, and the accurate reproduction of even the most sound, suitable especially for studios, recording studios, broadcasting stations, stage performances and computer. Absolutely fulfil the requirement of high quality for broadcasting and recording.
Usage:
1.Turn on your amplifier or mixing board and set the volume control to the minimum position. To connect the phantom power to the microphone turning on the phantom switch, accommodate the volume control from low to high to obtain your moderate level for protecting the sauna from pounding.
2.If the head of the microphone is covered by hand or brought close to the speaker, a howling sound may be generated. To prevent this, first decrease the volume, then place the microphone so that it is not pointed to the speaker and that there is a sufficient distance between the microphone and speaker.
3.The condenser unit itself is highly sensitive. please avoid any dropping, direct hit or apply any strong shock to it.
4.To maintain the sensitivity and quality of sound reproducing, avoid exposing it to moisture and extreme temperatures.
Important Notes:
● This is a condenser microphone only work with the device that could provide enough power for it.
When connected with desktop computer, the condenser microphone could be used alone. When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.
● If your device could not provide enough power(When used with Amplifier or Mixer,etc.), the sound volume recorded might be low, and please use a extra 48V phantom power adapter to connect it.(phantom power adapter is not included).
● Can not be used with mobile phone and tablet computer.
● If you want better sound effect, a sound card could be used.
● When recording, please put the microphone away from the amplifier to prevent recording noise due to amplifier.
Specification:
Polar Pattern: Uni-directional
Frequency Response: 20Hz-20kHz
Sensitivity: -34dB±2dB(1dB=1V/Pa at 1kHz)
Load impedance: ≥1000Ω
Equivalent Noise Level: 16dB
Max.SPL: 130dB(at 1kHz≤1%T.H.D)
S/N Ratio: 78dB
Electrical current: 3mA
Net Weight: 346g
Body Dimension: 46x150mm
Cable: 3m/9.8FT 3.5mm Male to 3Pin XLR Female Jack Stereo Audio Mixer Amp Cable Cord
Package Include:
Microphone x1
Shock Mount x1
Cable x1
Spounge Cover x1
Instruction x1